MOSSA Launch Angler Pack

• The Mossa Series is a future-ready kayak designed for today’s anglers. Through highly integrated technology and detailed design, it shifts the focus from complex equipment setup back to the fishing experience itself, allowing anglers to move away from complicated preparation work and truly spend their time enjoying fishing. Mossa is equipped with XPDL, a highly integrated center-mounted propulsion system that can be ready for launch in just one minute.
• The XPDL system combines human-powered, electric assist, and electric drive modes with unlimited 360° continuous steering, SpotHold, reverse propulsion, and smart navigation functions, enabling precise positioning, control, and efficient cruising. The system can be conveniently operated through the 360° Hand Control located on the left side of the kayak, the *Thumb Remote that can be mounted on a fishing rod or worn on the chest, and the VoyaX App for supported function settings and fishing spot editing.
• Mossa can also integrate a plug-and-play *Fish Finder System with bottom scan capability, providing real-time water depth, water temperature, bottom structure, and fish activity information to help users better understand fishing conditions.

 *Note: The Thumb Remote and Fish Finder System are optional accessories.

• The Hull Weight is 92.6 lb | 42 kg. This is the hull shell weight without any installed accessories.
• The Fully Rigged Weight is 164 lb / 74 kg. This is the total weight of the Mossa 128 after all accessories are installed and the kayak is ready for launch. It includes the hull, XPDL drive system, one battery, and all standard installed accessories.
• The Total Payload Capacity is 416 lb / 188.7 kg. This is the maximum weight the kayak can safely carry in addition to its fully rigged weight. It includes the operator’s body weight, all fishing gear such as rods, tackle boxes, and a fish finder, as well as any additional accessories installed on the kayak.
• The Crew Weight is 350 lb / 158 kg. This is the recommended load capacity of the original seat.

*Note: Distributing weight evenly and avoiding excessive concentrated load at the bow or stern is key to maintaining the optimal handling performance of the hull.

• The maximum positioning deviation of SpotHold is ±2.6–4.9 ft / ±0.8–1.5 m. The specific positioning accuracy depends on satellite signals and whether *environmental interference is present.

*Note: Stay away from interference sources such as metal bridges and high-voltage power supplies. The minimum GPS signal requirement for stable operation is 12 or more satellite signals.

• Yes. When the power port sealing cap is properly closed, the battery can effectively withstand splashing water and outdoor rain impact, ensuring safe use during your fishing activities.

You can contact an authorized dealer or submit a service request through the official website or App. Professional support staff will provide fault diagnosis. Most software faults can be resolved through OTA.

If mail-in repair is required, after receiving the mail-in service case number, send the device to the VoyaX repair center in Los Angeles or Dallas. Repair engineers will conduct a comprehensive inspection and repair of your device.

Important: When sending in the XPDL for repair, please use the original packaging and remove the left and right pedal assemblies, central dry storage box, propeller, anti-collision bottom fin, and support crossbar. This can effectively prevent secondary damage to your device during transportation.

• GPS determines the position of the kayak, while the compass identifies the bow direction. The motion sensors on the kayak and XPDL monitor changes in movement and direction. The system combines this information and supports smart functions such as SpotHold, Spot Cruise, Course Lock, and Track Cruise by continuously adjusting steering and propulsion according to the kayak’s position, direction, and movement.
• For optimal performance, keep the kayak operating in an environment without interference, and avoid large metal structures, cables, or similar strong magnetic interference.

1.The Mossa 97 is a compact, high-end electric fishing kayak designed specially for users who value lightweight and high-frequency fishing trips. Through tens of thousands of hydrodynamic tests and detailed design iterations, the Mossa 97 achieves easy transport, convenient storage, and a wide hull optimized for standing fishing, while retaining a professional-grade boat handling experience. It is suitable for both casual exploration and light-gear fishing.

2.The hull weighs only 66.1 lb and measures 9 ft 7 in × 40.5 in (LxW, respectively). No trailer is required, and a single person can easily load and transport it. Mossa 97 is equipped with XPDL, a highly integrated center-mounted propulsion system that can be ready for launch in just one minute.

3.The XPDL system on the Mossa 97 integrates human-powered, electric assist, and electric drive modes with unlimited 360° continuous steering, SpotHold, reverse propulsion, and smart navigation functions, enabling precise positioning, responsive control, and efficient cruising. The system can be conveniently operated through the 360° Hand Control located on the left side of the hull, the *Thumb Remote that can be mounted on a fishing rod or worn on the chest, and the VoyaX App for supported function settings and fishing spot editing.

4.Mossa 97 can also integrate a plug-and-play *Fish Finder System with bottom scan capability, providing water depth, water temperature, and bottom structure information to help you better understand real-time fishing conditions and fish activity.

*Note: The Thumb Remote and Fish Finder System are optional accessories.

A Mail-In Service Request is a repair service for product issues that require inspection, diagnosis, or repair by VoyaX technicians. After your request is reviewed and approved, shipping instructions will be provided for the designated VoyaX service center.

Launch Spot is automatically recorded when the kayak obtains GPS location information after departure, providing a convenient reference point for the return trip. This helps anglers explore and fish with greater confidence, without needing to manually save the launch location before departure.

*Note: Launch Spot is a navigation assistance tool and should be used together with local hydrological information, visual awareness, and changing weather conditions.

• Yes. When operated and maintained according to the product manual, the Mossa Series is suitable for freshwater, inshore, or sheltered saltwater environments. After each use in saltwater, rinse it thoroughly with fresh water and dry all metal parts. Important: Before rinsing, the protective covers for the electrical ports must be properly closed to prevent water from entering the ports, causing corrosion or short circuits.

• The unloaded hull draft is approximately 3.1 in / 7.7 cm. Under the *recommended operating load, the hull draft is approximately 6 in / 15.2 cm.
• However, before lowering the XPDL drive and skeg, the kayak requires at least 20 in / 51 cm of water depth.
• Therefore, although the hull can float and move in shallower water, the deployed XPDL drive and skeg extend deeper below the waterline. Before entering shallow water, approaching the shore, launching, or landing, these two components should be raised.

*Note: The recommended operating load is 350 lb / 158 kg.

• Yes. When the XPDL electrical ports are properly covered with protective caps, the above-water parts, including the display and 360° electronic Hand Control, have an IPX5 waterproof rating. This ensures that the equipment can continue to operate during heavy rain or rinsing. However, please note that IPX5 is not a submersion rating. Do not submerge the equipment in water, as this may damage the internal sealing structure.
• Therefore, the XPDL was designed with weight balance in mind from the beginning. When the *central dry storage box is installed, if the XPDL accidentally falls into the water, it can float on the surface and should be retrieved promptly.

*Note: This applies when there are no heavy items inside the central dry storage box, and the storage box hatch is fully closed and locked.

• The standard charging time is 6 hours. Please use the original charging adapter. A red light indicates charging, and a green light indicates fully charged. The safe charging temperature range is 32°F–113°F / 0°C–45°C.

1.Regularly checking the integrity of the propeller is crucial to maintaining excellent propulsion efficiency. If damage, cracks, or loose fasteners are found, replace the original propeller assembly in time.

2.Two sacrificial alloy anode blocks are installed under the XPDL. Through the principle of sacrificial protection,they provide core corrosion protection for the motor. It is recommended to inspect and clean the alloy anode blocks once every quarter. When the protection effect has been consumed to the critical level, with approximately one-third of the volume remaining, replace them to extend the structural durability of the device in extreme water environments.

3.The system’s high-efficiency output relies on the high-quality dedicated lubrication medium. Regularly checking the sealing performance of the lubrication system can effectively prevent abnormal mechanical vibration and noise. If lubrication performance is reduced, add the original dedicated grease in time. This is a key step in ensuring long-term smooth operation of the transmission gears.

4.Each VoyaX high-energy battery is designed for long-lasting range performance. To optimize the chemical activity of the cells, for long-term storage, it is recommended to maintain the ideal battery level of 40%–60% and complete one charge-discharge cycle every quarter. After use in a saltwater environment, clean the surface immediately to ensure the conductivity of the power ports and the overall service life of the battery pack.

5.The high-performance composite washer at the bottom of the Hand Control knob is an important component for providing control precision and a smooth damping feel. Please replace the high-performance composite washer according to system prompts. This can effectively prevent control feel degradation caused by natural aging and ensure precise steering.

The Mossa 97 combines compact dimensions with high-end performance. Its key features include:

1.Excellent portability: The compact hull design allows a single person to easily manage loading and unloading. It is ideal for car roof or pickup truck bed transport, and storage in limited spaces. No trailer is required, freeing you from strenuous physical labor and complicated preparation.

2.Exceptional stability: With an ultra-wide hull measuring 40.5 in | 102.9 cm, the Mossa 97 provides excellent primary stability, delivering a stable and comfortable experience for standing casts and casual fishing.

3.Professional and agile handling: Despite its compact and portable size, the Mossa 97 fully supports all XPDL functions, with a top speed of approximately *5.3 mph | 8.5 km/h. It provides the Mossa Series’ ultimate boat control experience and complete high-end smart features for light-weight fishing enthusiasts.

4.Good expandability: The full-aluminum track system measures 142.2 in | 360.8 cm in total length across the hull, providing ample space for installing additional accessories.

5.High frequency fishing scenarios: As an ideal kayak for freshwater and calm nearshore fishing, the Mossa 97 is suitable for quick launches after work, weekend fishing at small lakes and ponds, and casual fishing in calm inshore bays, giving users a convenient "go-anywhere-anytime experience".

*Based on internal testing under ideal conditions. Actual speed may vary depending on load, battery level, water conditions, wind, current, operating mode, and pedaling cadence.

Yes. During inspection, repair, or replacement, VoyaX may erase or reset system data. Before shipping the product, please connect the device through the VoyaX App and back up any important data associated with your account.

• Yes. If the battery is not connected or is damaged, the XPDL steering system will not work. In this condition, the steering shaft needs to be centered and secured with the *dedicated locking pin. Manual mode provides propulsion, and a paddle should be used to manually control direction.
• After the propulsion motor stops working due to power depletion, the steering system can still operate normally for about 4 hours, ensuring that the electronic steering system can still be used to control direction while the kayak is propelled in manual mode.

*Note: The dedicated locking pin is stored in the Central Storage Dry Compartment by default.

• The total bow storage capacity is 26 gal / 98.4 L. The capacity of the installed bow storage bucket is 11 gal / 41.6 L. The central dry storage box in front of the seat has a capacity of 2 gal / 7.6 L.
• The *Stern Tankwell measures 21.85 × 24 in / 55.5 × 61 cm.

*Note: The stern tankwell refers to the recessed area equipped with bungee cords, specially designed for storing tackle boxes, coolers, or other gear.

• The 360° knob on the Hand Control uses a precise Hall-effect sensing design. The XPDL propulsion steering device is driven by a brushless DC motor, providing precise torque. It has no cable and no rotation limit, with high durability and low risk of damage.

• Yes. On the real-time navigation information page of the XPDL main display, you can view the current battery capacity and remaining range. After registering and binding your personal device, you can view the battery’s full cycle count and battery health status in the VoyaX App under Product > Maintenance > Battery.

Spot Cruise can automatically steer the kayak toward a selected saved location, helping users reach fishing spots, docks, or other points of interest with less manual control. *Basic operation steps:

1. From the display home page, select Spots View.

2. Enter spot selection mode.

3. Use the four-way buttons to select a saved location.

4. Press OK to confirm the destination.

5. Select the propulsion level to start navigation.

The system will then control steering and propulsion and move toward the selected location.

To select another destination, exit the current Spot Cruise and select another saved location.

To immediately take manual control, pedal forward or backward for more than half a turn. The XPDL will exit the current navigation state.

Important: Spot Cruise does not monitor obstacles. Always pay attention to the route, water depth, potential other vessels, swimmers, and changing water conditions.

*Note: For specific operation steps, please refer to the user manual and official website details.

Yes. When operated and maintained according to the product manual, the Mossa 97 is suitable for both freshwater and saltwater environments. After each use in saltwater, rinse it thoroughly with fresh water and dry all metal parts and components.

Important: Before rinsing, the protective covers for the electrical ports must be properly closed to prevent water from entering the ports, which may cause corrosion or short circuits.

If the submitted information is incomplete, inaccurate, or the issue does not require Mail-In Service, VoyaX may request additional information or direct you to an authorized dealer or service center.

• Before launching, simply deploy the XPDL into the drive mounting position, secure the latch knob, and complete the electrical interface connection for the XPDL and battery components. The kayak is then ready to launch.
• After launching, adjust the seat to a comfortable position and tighten the seat rail fasteners. Lower the skeg and XPDL, and you can set off to enjoy a pure fishing journey.
• The seat has three seating installation positions to choose from. You can insert the seat into the corresponding mounting slot according to different height and seating posture requirements:

1.Low center-of-gravity seating position: Helps you maintain stability in wind and waves.

2.High center-of-gravity seating position: Provides better visibility and casting experience.

3.Tilted seating position: Similar to the dedicated seat angle of a racing vehicle, this position maintains a low center of gravity to improve stability and pedaling efficiency while optimizing the joint force angle. It ensures that during long fishing sessions, you can obtain stable waist and back support while maintaining a wide fishing view.

• Benefiting from the front hatch and deck drainage design, as well as the integrated molded sealing material of the hatch cover, the three independent storage compartments of the Mossa 128 can withstand rain spray or heavy rain impact from all directions. However, do not submerge them in water or use high-pressure washing for a long time directly at the hatch openings, as this may exceed the pressure limit of the rubber sealing.

• The Hand Control knob system and Thumb Remote use precise Hall-effect signal control. There is no cable connection or physical contact point, so they do not wear easily and can maintain precise control performance over long-term use.

• The optimal storage capacity for the smart battery is 40%–60%. Do not store the battery in a fully charged or fully depleted state. Long-term storage at full charge will accelerate aging, while fully depleted storage may prevent the battery from starting.
• Store the battery in a cool, dry, and well-ventilated environment. The recommended temperature is 10–25°C. It is strictly prohibited to expose the battery to direct sunlight or high-temperature areas above 45°C, such as the trunk of a closed vehicle.
• For long-term storage, be sure to disconnect the battery from the kayak and charger to prevent slow discharge. Upon removal from long-term storage, we recommend fully charging the battery before use.
• If you notice the battery is swollen or the housing is cracked, stop using it immediately and contact VoyaX After-Sales Support.

Through the XPDL display, you can view and select location information. Through the VoyaX App that is bound and connected with the XPDL, you can view, edit, and manage fishing spot information*. The information includes coordinates, orientation, depth, water temperature, and editable fishing spot names.

*Note: Keep App data synchronized. This is required to view fishing spot information on your phone.

1.Yes. If the battery is not connected or is damaged, the XPDL steering system will not work. In this condition, the steering shaft needs to be centered and secured with the *dedicated locking pin. Manual mode provides propulsion, and a paddle should be used to manually control direction.

2.After the propulsion motor stops working due to power depletion, the steering system can still operate normally for about 4 hours, ensuring that the electronic steering system can still be used to control heading while the kayak is propelled in manual mode.

*Note: The dedicated locking pin is stored in the Central Storage Dry Compartment by default.

No. Please do not ship your product until you receive approval from VoyaX. Once approved, you will be issued a service order number along with specific shipping instructions. Please ensure the service order number is clearly marked on your package. Packages received without a valid service order number may be lost or delayed in processing,VoyaX assumes no liability for any loss or damage to such shipments.

• Before landing, raise the XPDL drive and pull up the skeg using the pull cord. Before loading for transport, it is recommended to remove the drive, battery, and seat from the hull, and properly flip and secure the Hand Control. This can reduce the carrying weight and help protect the drive, Hand Control, and battery from unexpected vibration or impact during transport.
• If the hull is loaded in a relatively safe transport position, such as the semi-enclosed pickup truck bed, the seat may remain installed and laid flat.
• Finally, remove or secure all other loose accessories to prevent damage or loss, such as the hull scupper plugs.

• From the edge of the seat bottom rail to the edge of the front bulkhead, the flat front deck measures 24.4 in × *28.0–29.9 in / 62 cm × 71-76 cm. The sidewall height of the deck is 7.9 in / 20 cm.

*Note: The widest point is 29.9 in, and the narrowest point is 28.0 in.

• Yes. After the propulsion motor stops due to power depletion, the steering system can still operate normally for about 4 hours, ensuring that the electronic steering system can still be used to control heading while being propelled in manual mode, allowing a safe return.

• Currently, third-party batteries are not supported. Mossa uses a smart battery that can communicate with the XPDL main unit, Hand Control, and Thumb Remote, providing you with accurate range information. It can also identify potential problems and fault risks, and issue fault warnings, such as identifying power overload caused by propeller entanglement, thereby helping prevent damage to the motor or other electronic components.

Course Lock uses the kayak’s current heading as the target heading. Once activated, the system automatically adjusts steering and propulsion to offset the effects of wind, waves, and current, helping the kayak stay on the locked heading without continuous manual adjustment.

Course Lock can be activated with one button press. Select the propulsion level to adjust cruising speed. To change heading, turn the Hand Control knob toward the desired direction. After the kayak points to the desired heading, return the steering knob to center. The system will lock the new heading and maintain it automatically.

Press the Course Lock button again to exit the function, or pedal forward or backward for more than half a turn to disengage Course Lock and return control to the user.

Important: Course Lock does not detect obstacles. Always pay attention to the route, water depth, potential other vessels, swimmers, and changing water conditions.

Before launching, simply place the XPDL into the drive mounting position, secure the latch knob, and complete the electrical interface connection between the XPDL and battery components. The kayak is then ready to launch.

After launching, adjust the seat to a comfortable position and tighten the seat rail fasteners. Lower the skeg and XPDL, and you can set off to enjoy a pure fishing journey.

The seat has two seating installation positions to choose from. You can insert the seat into the corresponding mounting slot according to different height and seating posture requirements:

1.High center-of-gravity seating position: Provides better visibility and casting experience.

2.Reclined seating position: Similar to the dedicated seat angle of a racing vehicle, this position maintains a low center of gravity to enhance stability and pedaling efficiency while optimizing the joint force angle. It provides stable waist and back support while maintaining a wide unobstructed fishing view.

We strongly recommend using the original packaging to protect your product during transportation. If the original packaging is unavailable, please use sturdy alternative packaging that provides equivalent protection, or contact your original dealer for assistance. Please note that any damage resulting from insufficient packaging is not covered under warranty and may incur additional repair charges.

• The Mossa 128 features an optimized hull bottom and side gunwale design, aiming to provide precise handling, efficient speed performance, and a balanced combination of primary stability and secondary stability. This means that when you switch from a seated position to a standing position, the hull can remain stable. For most adult users, it can serve as a steady fishing platform on the water.
• If you are a beginner, it is recommended to try standing for the first time in waters with lighter wind and waves. After mastering balance, you can proceed with stand-up operation.

In regular fishing environments, a single battery provides 8–10 hours of operating time. With dual batteries, the operating time can reach 16–20 hours.

1.Manual Mode: All power is provided by human pedaling. Speed depends on the rider’s pedaling cadence, and the battery power is minimally consumed.

2.Assist Mode: Four assist levels are available. The brushless power motor senses the rider’s pedaling cadence and adjusts output power accordingly. Therefore, faster pedaling can generate greater thrust without requiring additional pedaling force from the rider. In this mode, battery consumption depends on cruising speed, and the overall power consumption is relatively slow.

3.Electric Mode: Ten speed levels provide continuous power without pedaling. Higher levels provide higher speed and thrust. Because water resistance increases significantly as speed increases, the highest Level 10 in this mode consumes battery power the fastest.

Reference data based on a single battery under ideal conditions*:

1.Assist Mode Level 2 | 3.0 mph: Can operate continuously for approximately 12.4 h, with a range of about 37.2 miles.

2.Assist Mode Level 4 | 4.7 mph: Can operate continuously for approximately 3.5 h, with a range of about 16.5 miles.

3.Electric Mode Level 2 | 1.1 mph: Can operate continuously for approximately 72.0 h, with a range of about 79.2 miles.

4.Electric Mode Level 6 | 3.0 mph: Can operate continuously for approximately 11.5 h, with a range of about 34.5 miles.

5.Electric Mode Level 10 | 5.6 mph: Can operate continuously for approximately 1.7 h, with a range of about 9.3 miles.

*Note: Actual performance may vary depending on load, water conditions, battery status, speed, and operating mode.

Before going ashore, raise the XPDL drive and pull up the skeg using the pull cord. Before loading for transport, it is recommended to remove the drive, battery, and seat from the hull, and properly flip and secure the Hand Control. This can reduce carrying weight and help protect the drive, Hand Control, and battery from unexpected vibration or impact during transportation.

If the hull is loaded in a relatively safe transport position, such as the semi-enclosed bed of a pickup truck, the seat may remain installed and laid flat.

Finally, remove or secure all other loose accessories to prevent damage or loss, such as the hull scupper plugs.

After inspection, VoyaX will determine the appropriate service solution, which may include repair, replacement, or other corrective actions. If additional damage is found or the issue is outside warranty coverage, a quotation or further service recommendation may be provided. Repairs will only proceed upon your approval.

• The seat base measures 18.9 in (W) × 20.7 in (D). The wide cushion area helps maintain a comfortable sitting posture even during long fishing sessions. The backrest height is 20.1 in, providing sufficient support for the waist and back and helping reduce fatigue caused by long periods of sitting.
• The recommended maximum load is 350 lb, and the solid structure provides stable support and confidence for anglers of different body types.
• The seat height can be adjusted between 7.3 in and 10.5 in with three positions. The tilted position helps maintain a lower center of gravity for stability while providing good height and visibility. It also helps reduce thigh pressure and maintain comfort during long periods of use.

• No. The XPDL system is specifically designed and engineered for complex fishing environments and is equipped with multiple protection mechanisms, helping ensure confident operation in different types of water.
• Physical Anti-Collision Protection: Equipped with an anti-collision bottom fin, which can effectively protect the propeller from impact. In the event of a severe collision, the XPDL latch knob located on the deck is designed to break first, reducing impact force to protect the propulsion unit.
• Smart Safety Sensing: The system has built-in sensing devices. When it detects the moment the drive pops up after impact, it automatically triggers shutdown and returns the steering to center to prevent secondary damage.
• Motor Safety Protection: When propeller entanglement occurs, the motor protection system monitors power and temperature in real time. Once the limit is exceeded, the display will immediately issue an alert and stop the system to protect the motor from damage.

If a repair invoice is required, please contact the VoyaX Support Team after payment has been completed.

• The total track length of the kayak is 203.35 in / 516.5 cm. The total length of the extended load tracks for installing accessories is 148.15 in / 376.3 cm, including:

1.Bow Handle Track: 7.95 in / 20.2 cm

2.Front Side T-Tracks: 31.5 in / 80 cm per side; 63 in / 160 cm total

3.Middle Side T-Tracks: 19.3 in / 49 cm per side; 38.6 in / 98 cm total

4.Rear Side T-Tracks: 19.3 in / 49 cm per side; 38.6 in / 98 cm total

5.Seat Bottom Rails: 27.6 in / 70.1 cm per side; 55.2 in / 140.2 cm total

• Do not worry, you can handle it quickly without any tools. Using our patented propeller knob-latch design, the propeller can be removed easily within seconds without tools. After clearing tangled fishing line or aquatic plants, you can easily reinstall the propeller and resume activity, ensuring your fishing trip is not interrupted.

Repair times vary depending on product condition, parts availability, and shipping transit times. You can check the latest status through the Progress Inquiry page using your service order number.

• Pedaling backward for more than half a turn activates Reverse Drive.
• When reversing, use the 360° steering knob to adjust direction. Pedaling forward for more than half a turn exits Reverse Drive.

• Press the SpotHold button on the Hand Control or Thumb Remote to enter SpotHold mode with one click.
• Switching to Manual, Assist, or Electric Mode, or pedaling backward for more than half a turn to enter Reverse Drive, will exit SpotHold mode.